A note about data scale:
Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data.
1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger.
Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: <http://geoplan.ufl.edu/education.html>
Boundary information for Florida Forever BOT projects was provided by the Florida Forever Program, Office of Environmental Services, Division of State Lands, Florida Department of Environmental Protection. With the exception of a small number of boundaries obtained as digital boundary files from various sources, the majority of boundary information was received on paper source maps with various scales. FNAI staff digitized these boundaries (on screen or with digitizer) using 1:24000 7.5' USGS quadrangles as base maps. The following digitizers were used by the FNAI GIS:
CalComp DBII, accuracy of +/- .01 inch CalComp DBIII, accuracy of +/- .005 inch CalComp 9500 Series, accuracy of +/- .005 inch
When digital boundaries from one source overlapped with digital boundaries from another source, the boundaries were adjusted by FNAI staff to eliminate the overlapping areas. Adjustments were made based on the best known information about the source of the boundaries. All overlaps greater than 0.01 meters were removed using this process. Overlaps less than 0.01 meters were removed using the ArcInfo CLEAN command.
- All records were upcased. - Changed original layer name from FFBOT to FL_FOREVER_AUG07. - A DESCRIPT field was added based on PROJECT_NA - A FGDLAQDATE field was added based on date GeoPlan downloaded the data